Revisions

What is new since the video.

The pages above and the demonstration video show the bridge as it was on September 24, 2026. This page is everything added since: what you can do now, the permission it needs, and a few things to try. The examples are only examples; ask in your own words, the way you did on the tour.

Where an entry changes something an earlier page says, it tells you, and this page wins.

The price marker

Added September 26, 2026

Show, hide or recolor the price marker, the box on the price scale that shows the last price. It is the Data Series dialog's own Price marker setting.

Permission: the __HTAIBridge indicator on the chart, the same as any chart setting. No menu switch.
Try asking
  • Turn off the price marker on my NQ chart.
  • Make the price marker yellow.

Chart Trader by workspace and sync color, and Auto Tab colors

Added September 28, 2026

"Every chart" can now mean every chart in the workspace you are looking at, or every chart whose Auto Tab sync button is a given color. Your assistant can also set Auto Tab's two colors: the button on the chart's toolbar and the sync button in the Chart Trader panel.

Changes: on the Chart Trader page, the reply to "set every chart" says the bridge refused a set with no window filter. "Every chart in this workspace" now works as asked.

Permission: Chart Trader on the menu for the panel and its sync button. The toolbar button belongs to the window, so it needs Charts instead.
Try asking
  • Set every chart in this workspace to Sim101, one contract.
  • Set every chart with a red sync button to two contracts.
  • Make the Auto Tab button blue on my NQ chart.

Submit buy and sell orders

Added September 29, 2026

Your assistant can now submit orders: a buy or sell at market, or a limit or stop at a price you name. Below the market a buy is a limit and a sell a stop; above it, the other way round. Every order uses the account, quantity, TIF and ATM strategy in that chart's Chart Trader, the same settings your own order would use, and the bridge asks you before each one. It never reverses a position: an order bigger than what you hold the other way is refused and nothing is sent. A buy limit asked for above the market is refused too, never turned into a stop.

Changes: the Chart Trader page and the recorded Orders steps say the bridge never places entry orders. That was true on September 24. It is not now; the Orders page's opening lines say so. On the Orders page, placing an order now sits under "Now also by prompt"; sizing an order came on October 3 (below).

Permission: Orders on the menu (the menu now) and the __HTAIBridge indicator on the chart. --- Unattended under Orders skips the question before each order.
Try asking
  • On my ES chart, buy one at market.
  • Put a sell limit for one ES ten points above the market.
  • Get me flat on ES.

ATM templates

Added September 30, 2026

Create, copy, change and delete your ATM strategy templates, targets, stops, breakeven and trail included, then select one in Chart Trader and trade with it. Chart Trader's ATM list updates at once, and a change to the template you have selected is used by your next order, with no reselecting.

Three NinjaTrader rules your assistant follows: a Currency amount covers the whole order and is shared across its contracts, so a $50 stop on each of two contracts is a $100 stop. Price means an actual price, not a distance; for points, use Ticks. Breakeven and trail count in ticks under Currency and Price.

Permission: Chart Trader on the menu. Changing, replacing or deleting a template also needs Destructive, and your yes unless --- Unattended is on. A template selected in a Chart Trader window cannot be deleted: pick another there first.
Try asking
  • Make me an ATM template called 2T Scalp in ticks: two targets of one contract, at 8 and 16 ticks, both stops at 10.
  • Copy it to 2T Swing, make target 2 forty ticks, and add a breakeven at 8 ticks profit, plus one tick.
  • Pick 2T Swing in Chart Trader on my ES chart.

The whole chart Properties dialog, and layers

Added September 30, 2026

Any setting in the chart's Properties dialog, now including the chart's font, the crosshair type and every color of the chart style, by the names the dialog shows, on NinjaTrader's chart styles and the HT ones. And what draws on top of what; changing that reloads the chart once, one flicker. When a style is set so a color will not show, or an indicator puts itself back after a move, your assistant tells you.

Permission: the __HTAIBridge indicator on the chart. No menu switch.
Try asking
  • Make the price scale numbers size 14 on my NQ chart.
  • Make the candle wicks purple.
  • Put the bars on top of the indicators.

Indicator plot lines and levels

Added October 1, 2026

Every plot line and fixed level of any indicator, ours, NinjaTrader's or anyone's, read and set by name: color, width, dash, opacity and plot style, and a level's value. Only the parts you name change.

Permission: reading needs nothing. A change needs the __HTAIBridge indicator on the chart, and the chart reloads, as for any indicator setting.
Try asking
  • What width and opacity are my VwapPlus SD lines?
  • Make the VwapPlus SD lines width 2 and dashed.
  • Move the RSI's upper line to 75 and draw the RSI as dots.

The whole Market Analyzer by prompt

Added October 1, 2026

The grid itself: instruments (ES is the front month), headings and blank rows, any column from NinjaTrader's list, indicator columns with their settings, cell colors, moving rows and columns, sort and auto sort, the heading style and the grid's font, templates saved and loaded, and every cell read back.

Changes: the Market Analyzer page listed filling the grid as on the road when it was recorded; that list is now its "Now also by prompt" list, and everything in it works.

Permission: Charts on the menu. Removing a row or column, loading a template (it replaces the grid) and saving over a template also need Destructive: one question for all of them, unless --- Unattended is on.
Try asking
  • Open a Market Analyzer with ES, NQ, YM and RTY under a heading called INDEX, and add Last price, Net change and an RSI column, 9 periods, on 5 minute data.
  • Color Net change red below zero and green above, and sort by it, biggest first.
  • Which one is up the most today? Then save this as my Morning template.

Any NinjaTrader window: a picture, and to the front

Added October 1, 2026

A picture of any open NinjaTrader window as you see it: the Market Analyzer, a SuperDOM, the Strategy Analyzer, the Control Center. Your assistant also uses it to check its own work before it tells you a change is done. And any window can be brought in front of the others, restored if it was minimized.

Permission: a picture needs nothing. Bringing a window to the front is Charts on the menu.
Try asking
  • Show me the Market Analyzer.
  • Pull the Market Analyzer to the top.

Saved templates of every kind, now delete too

Added October 2, 2026

The tour saved and loaded templates. Now every kind can also be deleted by name: chart, indicator, drawing tool, Market Analyzer, ATM and the rest. The bridge names the file and waits for your yes. Trading hours templates are the exception: those stay with Tools > Trading Hours.

Permission: Destructive on the menu, and your yes unless --- Unattended is on. Deleting a Default template means new ones start from NinjaTrader's built-in defaults, and the question says so.
Try asking
  • What chart templates do I have?
  • Delete my chart template Old blank.

Size a working order

Added October 3, 2026

A working order you placed yourself can now be made more or fewer contracts: a stop, a target or an entry. The bridge says the change back and waits for your yes, the same as a buy or sell. An ATM strategy sizes its own stop and target, so those are left alone; to exit more at that price, place another order there, and when the ATM goes flat it cancels what is left.

Changes: the no-reverse rule now counts stops with stops and targets with targets, never a stop added to a target. Long three contracts can carry three stops of one and three targets of one, or one stop of three, but not a fourth stop or a stop of four. They sit on opposite sides of price, one side closes the position, and --- Cancel orders on flat clears the other. With that tick off, the question and the reply say so when both sides together are more than the position.

Permission: Orders on the menu and the __HTAIBridge indicator on the chart; your yes unless --- Unattended under Orders is on.
Try asking
  • Make my stop 3 contracts.
  • Take my ES buy limit down to one contract.

MIT entries, when you name them

Added October 3, 2026

A buy or sell at a price is still a limit on the near side of the market and a stop on the far side, as before. Say MIT and it becomes a market-if-touched order instead: it sits where a limit would, a buy below the market and a sell above, and fills at market the moment price touches it. The question your assistant asks says MIT, so you know which one is going in.

Left out on purpose: stop-limit entries. Price can go straight through a stop-limit and it never fills, so the bridge does not place them; ask for a stop instead, or place it by hand.

Permission: Orders on the menu and the __HTAIBridge indicator on the chart; your yes unless --- Unattended under Orders is on.
Try asking
  • Buy one NQ MIT twenty points below the market.
  • Sell one MIT at 31500.

OCO on and off

Added October 3, 2026

Chart Trader has its own OCO switch, the one in its right-click menu that puts the OCO mark at the top of the chart. Your assistant can now turn it on and off. While it is on, every order placed from that window is linked: when one fills or is cancelled, the rest are cancelled. So a bracket without an ATM is one sentence: turn OCO on, place the stop, place the target, turn it off. Turn it off before the next group, or the new orders join the old one.

Permission: Chart Trader on the menu for the switch; the orders themselves need Orders and your yes as usual.
Try asking
  • Turn on OCO, put my stop at 23500 and my target at 23600, then turn it off.
  • Is OCO on for this window?
← Start Here